 |
PT440ABN (New Motor & Reservoir) $210.00 D051
Mercury O/B, Mercruiser, Early Volvo Penta
Merc #’s: 88475A5, 93247A4, & A7
92975A6, & A28, 76395A2, & A5
67914A2
Screws, Gasket & Drive Shaft Coupler included
3-Wire Connection
|
 |
Use this tilt system
side oil fill diagram for part numbers PT475TN-4, PT470N, PT476NMK-2 or
PT471NMK
|
 |
PT 475TN-4
(New Motor & Pump) $480.00 D543
Mercury/Mariner 35-220hp Outboards
1985-’92 with Design 1, 3-RAM Side
Fill Integral Trim/Tilt System
Merc #’s 99186, 99186-1 & 99186T
2-Wire Connection, Supplied complete with
Mounting bolts & Wire harness
For New Motor replacement see PT 476NMK-2
|
 |
PT470N
$470.00
New 12V 3-wire motor
Fits Mercury O/B
3-wire Version PT475TN-
No wiring harness necessary
|
 |
PT 476NMK-2 (New
Motor & Kit) $299.00 D991
Kit includes: New 2-Wire Motor,
Mounting flange for the Original
Mercury pump, New Oil Seal,
O-ring, Coupler, Hardware &
Wire Harness (#WH476)
This is a replacement motor kit for
Mercury #99186T, obsolete square
Eaton motors used from ’85 to ‘92
|
 |
PT471NMK
$272.00
New Mercury O/B
3-wire version of PT476NMK-3
Complete with O-ring and hardware
No wiring harness necessary
|
 |
Use this
tilt system aft oil fill diagram for part numbers PT 472NM
or PT485NMK-2
|
 |
PT472NM
$196.00
New 12V 3-wire motor
Fits Mercury O/B
This is the 3-wire version of
PT485NMK-3 Complete with
o-ring and coupler
|
 |
PT 485NMK-2 (New Motor & Wire
Harness) $222.00 D951
Mercury/Mariner 1993-‘95
Design 11, Aft Fill 3-Ram Integral
Trim/Tilt System
Replc. 3-Wire Square Motor
Replc. Merc # 811628 with an API
2-Wire High Performance Motor &
Conversion Wire Harness (WH 476)
Flat Blade Coupler & O-ring Included
|
 |
PT486NM (New Motor) $182.00
D031
Mercury & Mariner O/B 1996 & Up
135, 150XRG Magnum III,
175, 200, 225, 250hp
This trim motor fits Mercury Optimax
105-140 Jet
Replc. Merc # 828708, 878265A1, A4
2-Wire Motor
O-Ring & Mounting Bolts Included
|
 |
 |
PT 495NK-2 (New Motor/Reservoir & Wire
Harness) $328.00 D822
Mercury, Mariner, & Force
Single Ram Tilt Systems.
Fits Assembly # 824051
Includes: Conversion Wire Harness (WH 476)
Coupler, O-Ring & Mounting Bolts
Replaces Square 3-wire motor w/4-bolt pattern.
|
|
|
PT490N
$284.00
New 12V 3-wire Motor & reservoir
3 wire version of PT495NK-3
No wiring harness necessary
|
 |
PT497NK
$260.00
Fits Mercury/Mariner
1 Ram tilt Systems & Force
2 Ram trim/tilt Systems
Replaces: 811674, 811699, 813447,809885A1, A2
Includes Coupler Kit, gasket, & 4 stainless steel mounting bolts.
|
 |
PT498NM
$196.00
New 12V 2-wire motor
Fits Late Model 25-50hp
Mercury & Mariner Outboards
Replaces: Merc # 827675A1
2-wire connection
|
 |
PT 500N-2 (New Motor & Pump)
$469.00 D503
Late Model Mercruiser using a
3-Wire Motor with Oildyne Pump
Merc # 14336A8, A20 & 88183A12
PT500NM-2 $178.00
New 12V 3-wire Motor
Replaces: 17649A1 & 87828
This motor fits PT500N-2, PT501N-2
PT504N-2
VB 500N-2 (New Pump & Reservoir) $290.00 D561
|
 |
PT 501N-2 (New Motor & Pump)
$474.00 D813
Mercury O/B 225hp – 275hp
Replc. #’s 823653A5, 92459A4
This unit is also used to drive
K-Plane Trim Tabs.
3-Wire Connection
**This Unit has a 3.5” Reservoir
VB501N-2
$290.00
New Pump & Reservoir
3-1/2" Steel Oil Reservoir
|
 |
PT 504N-2 (New Motor & Pump)
$650.00 D053
Mercury/Mercruiser
Replc. Merc # 92459A3, 92459A8,
846859A4, & 818161A2
3-Wire Connection
This is a High Pressure Pump for Racing Applications
**This Unit has a 5” reservoir
VB504N-2
$490.00
New Pump & Reservoir
5" Steel oil reservoir
|
 |
PT510NM $650.00
New 12V
3-wire Motor/reservoir/pump
with mounting bracket & Wire Harness. This system is ready to plug into
a Mercruiser Wire Harness.
|
 |
WH
476 $68.60 D94
Wire Harness with relays. Use this harness to convert Mercury 3-Wire systems to 2-Wire
Use with API Marine #’s PT-476NMK-2,
PT-485NMK-2 & PT495NK-2.
API 2-Wire Motors have more power and a lower amp draw than the O/E 3-Wire Motors
The
RO40 are sold in quantities of 2, 4, or 6.
These are the relays for the WH476 wire harness.
|
